We use cookies to recognize the preferences of our users and to optimize this website. Detailed information and how to withdraw your consent at any time can be found in our privacy policy.

CATALOG

1
Yes
None
1
1000000
/products/catalog/
Thumbnail

Categories:

LOW LOCATION LIGHTING
LightLine Pet-X Photoluminescent Strips

The LightLine LLL System is the easiest and most cost effective Low Location Lighting system to install, requiring only the application of the LLL strips where needed. Cutting on required lengths can be done easily with a knife. The system is finalized by positioning the LLL signs/stickers at the right places. When you choose to install our LightLine system, time savings up to 200% can be achieved.

LightLine Pet-X photoluminescent strips are Non PVC/ Halogen-free plastic strips with backlighting material and a strong self-adhesive foam tape on the back. The material has a ‘glossy’ finish which is easy to clean and gives it a high quality appearance. The LightLine strips are available with or without 5mm safety green edges at the top and bottom of the strips.

LightLine strips have a standard length of 99 cm, 50 mm height, 1,5 mm thick and are produced with the high luminescence class XXL. All strips have a self-adhesive backing for easy fixing during new builds or refurbishment projects. LightLine strips are besides Non PVC/halogen-free, flame retardant and therefore exceeding all current requirements. Upon request we can manufacture LightLine strips in other widths and/or with other coloured marking stripes.

Approvals

• DNV MED
• Wheelmark
• Korean Register

Standards

• Complies with IMO Resolution A. 752 (18) and ISO standard 15370

[table id=44 /]

Note; The width of the photoluminescent material in the strips with the green edges is shown in parentheses, the width of the green edges is 2 x 5 mm.

Aluminium Profiles and Inserts

Our LightLine LLL Profile System is a system consisting of an extruded aluminium carrier and rigid photoluminescent strips. We have two different types of profiles at our range; an angled or a flat profile containing a 55,4 mm wide visible backlighting strip. The performance of the rigid panels is certified by DNV.

The flat profile is made of anodized aluminium and contains a central channel in which a strip of photoluminescent material is inserted. End caps are available to protect the ends of the profile. The angled profile is slightly angled away from the vertical to allow the photoluminescent strip to catch more light.

Approvals

• DNV
• Wheelmark

Standards

• Complies with IMO Resolution A. 752 (18) and ISO standard 15370

[table id=45 /]

Stairnose Markers

Luminous stair step signs for marking stairs in escape routes mainly include stair step strips, side edge markers and round wall or floordots. Like regular stair step strips, our photoluminescent stair step strips also has an anti-slip coating which will reduce falling or tripping. The strips clearly display the steps at night or during a power failure.

[table id=46 /]

[table id=48 /]

Including a self adhesive backing and 90 degrees angle.

 

Photoluminescent Rope

The Photoluminescent rope is made out of photoluminescent pigment and high quality resin. After absorbing visible light, the Photoluminescent rope will glow for 8 up to 12 hours in the darkness.

[table id=49 /]

Traildots

Photoluminescent aluminium traildots for marking routes with or without arrow. In diameter 90 mm or 200 mm. All trialdots have a self-adhesive backing. Also available: a special mounting bracked designed for anti-skid traildots to fix on metal staircases. Please contact us for more information of these mouning brackeds.

[table id=50 /]

LightLine PU Guideline

The PU guideline is extremely flexible and can be used for the marking of stairs, stairnoses and contourmarking. It has an anti-slip surface and is resistant against most chemicals. It can be fixed with doublesided foam tape or glue.

Technical data

Article number: LLPUG
Width: 40 mm, insertstrip 35 mm
Afterglow: 10 min. 200 mcd/m² – 60 min. 28 mcd/m²
Dimensions: 40 mm x 10 m

LLL Slot Strips

Our LLL Slot Strips are specialy designed with predrilled holes which allows you to install them on the roughest services.

Technical data

Article number: ALUSLOT4
Dimensions: 1000 mm x 50 mm
Material: Aluminium
Quality: XXL

Electrical Low Location Lighting

Electrical Low Location Lighting systems can be installed both floor-mounted or wall-mounted. Electrical Low Location Lighting systems are considered ‘active’ systems, compared to ‘passive’ LLL systems made of photoluminescent material.

Certification and approvals

Low Location Lighting systems comply with the environmental conditions and test procedures as defined in the requirements of the current editions of:
• IEC Pub. 598-2-22
• Regulation for the Performance of Type Tests for Electric Appliances Components
• Type Approval of Instrumentation and Automation Equipment, DNV.
• Type Approval System, Lloyds Register (LR)

Technical data LED-strip

• Standard LED-distance: 200 mm
• “High brightness” LEDs in colour “true green” (540 mcd. minimum)
• IP Grade: IP 67
• Operating temp.: – 15° C to + 55° C
• Life time: > 150.000 hours
• Due to high flexibility, the LED-strip can follow even 90° corners or tight curves without any electrical interruption

For more information and application possibilities, please contact us via the contact form or email info@nordicseasafe.com.

LOW LOCATION LIGHTING
LightLine Pet-X Photoluminescent Strips
The LightLine LLL System is the easiest and most cost effective Low Location Lighting system to install, requiring only the application of the LLL strips where needed. Cutting on required lengths can be done easily with a knife. The syst... Read More
Aluminium Profiles and Inserts
Our LightLine LLL Profile System is a system consisting of an extruded aluminium carrier and rigid photoluminescent strips. We have two different types of profiles at our range; an angled or a flat profile containing a 55,4 mm wide visib... Read More
Stairnose Markers
Luminous stair step signs for marking stairs in escape routes mainly include stair step strips, side edge markers and round wall or floordots. Like regular stair step strips, our photoluminescent stair step strips also has an anti-slip c... Read More
Photoluminescent Rope
The Photoluminescent rope is made out of photoluminescent pigment and high quality resin. After absorbing visible light, the Photoluminescent rope will glow for 8 up to 12 hours in the darkness. [table id=49 /]
Traildots
Photoluminescent aluminium traildots for marking routes with or without arrow. In diameter 90 mm or 200 mm. All trialdots have a self-adhesive backing. Also available: a special mounting bracked designed for anti-skid traildots to fix on... Read More
LightLine PU Guideline
The PU guideline is extremely flexible and can be used for the marking of stairs, stairnoses and contourmarking. It has an anti-slip surface and is resistant against most chemicals. It can be fixed with doublesided foam tape or glue.... Read More
LLL Slot Strips
Our LLL Slot Strips are specialy designed with predrilled holes which allows you to install them on the roughest services. Technical data Article number: ALUSLOT4 Dimensions: 1000 mm x 50 mm M... Read More
Electrical Low Location Lighting
Electrical Low Location Lighting systems can be installed both floor-mounted or wall-mounted. Electrical Low Location Lighting systems are considered ‘active’ systems, compared to ‘passive’ LLL systems made of photoluminescent ma... Read More