The T-ISS SeaMate Ve-1 hydrostatic release unit is designed to operate in all conditions, from extreme heat to the polar environment. In the exceptional situation your vessel sinks, the T-ISS SeaMate Ve-1 will automatically release your life rafts and EPIRB’s.
Our innovative design increased the reliability, that’s why the T-ISS SeaMate Ve-1 has an expiry life of 3 years. This means you only replace the HRU every 3 years, instead of 2 years which is common. Besides the cost saving, this also reduces the environmental footprint. The T-ISS SeaMate Ve-1 hydrostatic release also fits on remote release systems, this enables you to release life rafts remotely. An EPIRB model is also available, delivered with the bolt and nut to connect the EPIRB to your vessel.
Technical data
Dimensions: 165 x 75 x 65 mm
Weight: Approx. 0,25 kg
Benefits & Features
The innovative design and the high quality of our HRU’s increased the reliability, which is why the T-ISS SeaMate Ve-1 has an expiry life of 3 years and can be used in all weather conditions, from extreme heat to the polar environment. This means you only have to replace the HRU every 3 years, instead of 2 years which is the standard. Besides cost saving, 3 years expiry also reduces the environmental impact. We can provide you with five different HRU models, each with a different application. A basic model for 6 to 150 pax, a basic model for 1 to 12 pax, an EPIRB model, a remote released model and a combi model.
Approvals
• Russian Register
• DNV
• USCG
• Korean Government
Standards
• In compliance with ISO 15734
[table id=1 /]
HRU Hooks
The HRU hooks are suitable for various HRU models and are made out of SS316, and have a breaking strength that complies with ISO6892. All hooks are packed in sets of 10 pieces.
[table id=2 /]
The T-ISS Liferaft / Rescue boat hook PX01 is a combined automatic release hook which can handle rescue boats and liferafts up to a safe working load of 35 kN. This hook can be used for rescue boats with a davit load less than 3500 kg and/or a davit launched liferaft up to 40 pax. The PX01 release hook has two modes of operation to allow for safe evacuation regardless of the conditions:
- Automatic release when the craft enters the water
- Manual release when waterborne if auto-release is not possible due to added load on the reserve boat while being towed or when sea conditions are bad
Technical data
Article number: RELHK-PX01
Maximum SWL: 3500 kg
Material: Stainless steel 316 / Duplex
Service life: 5 years
Dimensions: 260 x 260 x 70 mm
Weight: Approx. 8,5 kg
Benefits & Features
The PX01 will increase safety, as the crew only need to familiarize themselves with one hook, instead of two. There is no second hook, dangerously swinging around when lowering. In distress situations the crew will instantly know which hook to use, as there is only one hook. The most economical solution, why buy two hooks if one is sufficient?
Approvals
• RINA
• EC Directive 96/98EC on Marine Equipment (MED)
Standards
• LSA Code for Hooks for Liferaft Launching, as amended MSC.81(70).
• Fully compliant with updated SOLAS requirements as per Resolutions MSC.320(89) and MSC.321(80).
The T-ISS Liferaft release hook PX02 is an automatic release hook for davit launched liferafts, which can handle a safe working load of 25 kN. The hook can be operated as an automatic release hook, releasing when the raft enters the water, or as a manual release hook.
Technical data
Article number: RELHK-PX02
Maximum SWL: 2500 kg
Material: Stainless steel
Service life: 5 years
Dimensions: 300 x 190 x 90 mm
Weight: Approx. 8,2 kg
Approvals
• RINA
• EC Directive 96/98EC on Marine Equipment (MED)
Standards
• LSA Code for Hooks for Liferaft Launching, as amended MSC.81(70).
• Fully compliant with updated SOLAS requirements as per Resolutions MSC.320(89) and MSC.321(80).
The T-ISS Rescue boat hook PX03 is a manual release hook for rescue boats, which can handle a safe working load of 15 kN. The hook is easy to operate/maintain and comes with a 5 year service life. The hook is designed to be opened manually and can be operated by one person. By pushing the release handle in the upward position, the hook will open.
Technical data
Article number: RELHK-PX03
Maximum SWL: 1500 kg
Material: Stainless steel 316 / Duplex
Service life: 5 years
Dimensions: 260 x 135 x 60 mm
Weight: Approx. 4,5 kg
Approvals
• RINA
• EC Directive 96/98EC on Marine Equipment (MED)
Standards
• LSA Code for Hooks for Liferaft Launching, as amended MSC.81(70).
• Fully compliant with updated SOLAS requirements as per Resolutions MSC.320(89) and MSC.321(80).
Light, compact and easy to use, our Emergency Escape Breathing Device (EEBD) is perfectly adapted to confined spaces onboard your vessel. It’s designed to escape from toxic or oxygen deficit environments, which require easy and immediate donning. The EEBD is packed in a handy carrying bag. Positive pressure in the hood eliminates any risk of inhaling toxic gases. An alarm indicates when the air supply is about to run out.
Technical Data
Cylinder working pressure: 210 bar
Cylinder capacity: 3 l
Weight: EEDB 6 kg / Cabinet 4 kg
Duration: 15 minutes
Non-pressurized delivery
Benefits & Features
The T-ISS EEBD is intended to be used to escape from a machinery space and be carried by fire fighters to give personnel in need of assistance. An EEBD is not intended to be used for fire- fighting purposes or entering oxygen-deficit or toxic environments, for firefighters use our SCBA. This EEBD is designed according to Chapter 3 – Fire System Safety Code (FSSC)/2.2. A training version of this EEBD is also available.
Approvals (EEBD)
• DNV module B&D
• Wheelmark
• Lloyd’s Register & ABS approved cabinets.
Standards
• Complies with SOLAS 74 and reg. 11-2/13.3.4 and 13.4.3
• Complies with TS EN 1146/15 incl. A1, A2 and A3
[table id=7 /]
The SCBA is a Self-Contained Breathing Apparatus, with a six liter volume steel cylinder, positive pressure. This self-contained breating respirator is used by fire-fighters and emergency rescuers. The full package includes a steel cylinder, full face mask, back strap, supply valve, alarm whistle, pressure reducer and completely packed in a carrying bag. The alarm pressure is set at 46 Mpa.
Technical Data
Article number: SCBA-RIZK6/30
Pressure: 300 bar
Cylinder: Alloy steek, 6 l
Working time: 60 minutes
Dimensions: 700 x 300 x 480 mm
Weight: Approx. 16 kg
Approvals
• DNV MED module B&D
• Wheelmark
SOLAS regulations require a permanent display of the general arrangement plans on a ship’s bridge (GA plan, Fire Safety plan and Escape plan). The Rolalux VH01 Rolldown Cassette gives you the opportunity to store 1 up to 3 different plans in the space. It is required that the general arrangement plans are kept up-to-date. Because of this, the VH01 Rolldown allows for easy replacement of the plans. You can simply remove and replace all three plans in the Rolldown system easily. Safety and evacuation plans should be permanently available to support the captain and officers on ships above the 20 meters. On the drawings a number of things must be clearly highlighted:
- Where to find the control station on each deck
- Where parts of the ship are enclosed by fire resistant bulkheads
- And the general data of the fire alarm systems
Technical data
Material: aluminium anodised
Dimensions: 1000 x 125 x 130 mm
Weight: Approx. 5,0 kg
Benefits & Features
• Store 1-3 plans in the space
• Easy replacement of plans
• Meets SOLAS regulations (Chapter II-2, Regulation 15.2.4)
• Modern design and solid mechanism
• Ensures a clean, well-arranged bridge
• Wall or ceiling mount possible
• Other dimensions available on request
[table id=8 /]
The T-ISS Fire plan container is a watertight container that stores a copy of a fire plan and / or an escape route plan. As we’ve recognized that fire plan containers are damaged easily, we have developed a stainless steel fire plan container, which resists the harsh maritime environment. Fire and safetyplans must always be exhibited for the guidance of the ship’s crews showing clearly for each deck as required by the SOLAS Chapter II Reg. 15/2.4.1 and 2.4.2.
Technical Data
Art. number: FPC
Packaging: 2 containers / box
Dimensions: 980 x 100 mm
Weight: Approx. 2,2 kg
IMPA: 332613
ISSA: 7585200
Benefits & Features
• Will last your ships lifetime
• Resistant to weather influences unlike PVC/plastic containers
• Suitable for all the standard plan sizes
• Watertight / marine environment resist
• Stainless Steel container
• Comes with photoluminescent “Fire plan” or “Fire and Safety plan” sign and sticker
• Comes with wall mounting brackets
Standards
• Complies with IMO / SOLAS II-2 15/2.4.1 and 15/2.4.2.
The goal of the International shore connection is to keep a standby hose attachment to get a connection from shore or from other ships for onboard firefighting, in case there is a total failure of pumps onboard. While using the International shore connection, the sea water is supplied at a pre-decided pressure and is connected to the ship’s fire main.
Technical Data
Maximal pressure: 1.0 N / mm2
Thread thickness: 2”
Dimensions: 285 x 260 x 70 mm
Weight: 3 up to 7 kg
Benefits & Features
• Designed to last in the tough marine environment
• BMC glass fiber polyester box, flame retardant
• Cabinet door can be opened both the right and left direction
• Stainless Steel lock and hinges
• Comes with applied SafeSign sign with 5 year warranty, even on outdoor use
[table id=9 /]
The Besto 300 Newton inflatable twin chamber lifejacket is an automatically operated lifejacket designed in accordance with the latest SOLAS/MED requirements and is designed for use on open sea and in het most extreme weather conditions.
Technical data
Wearing size: 43+ kg
Buoyancy: 300N
CO2 cylinder: 2x 60 g
Benefits & Features
• Cordura cover and tailored design
• Strong zipper
• Twin chamber lifevest for optimal safety
• Fleece collar for extra comfort
• Orange and yellow model feature easy wipe clean fabric
• Double crotch strap
• Safety harness
• Standard system: Halkey Roberts V90000 or United Moulders MK5
• Also to be used when wearing heavy protective waterproof clothes
Approval
• Wheelmark
Standards
• SOLAS 74/96, IMO Res. MSC.48(66) & Res. MSC.54(66) and A689(17).
[table id=10 /]
The Besto 300 Newton inflatable professional style lifejacket is an ergonomic offshore working jacket and can be used in the most extreme weather condition. The lifejacket will always rotate the body so the airways are clear of the water.
This model has a good body fit due to the soft outer cover and special neck shape. The collar is strapped onto the back, this gives a comfortable neck fit. Also it gives a good neck/ head support when the jacket is inflated.
The jacket comes standard with a crotch strap to enhance performance and freeboard. The jackets are finished with edge binding all-around and has a floating capacity of 300N. The jackets are available in various colours.
Technical data
Wearing size: 40+ kg
Buoyancy: 300N
CO2 cylinder: 60 g
Benefits & Features
• Also to be used when wearing heavy protective waterproof clothes
• Automatic and manual activation
• Two reflective strips for better visibility
[table id=11 /]
The automatically water-activated LED lifejacket light with “off” function, is a 5-year lifejacket light DNV certified on alkaline batteries, simplifying light disposal on expiration. It significantly exceeds the requirements on brightness and duration. It’s a very compact and the thin design and equipped with light bubble/ dome, but the integrity of inflatable lifejackets will be maintained. It is delivered with a clip, which fits almost any lifejacket.
The light is deactivated by pressing the power button on the front side. If the light after disruption is brought back to automatic mode, and water contacts are dry, splash water on the contacts and the light goes on again. Activation and deactivation is clearly marked on the label.
Technical data
Article number: LJL-WA
Dimensions: 62 x 30 x 22 mm
Weight: 44g
IMPA: 330143
Flash frequency: 50-70 x per minute
Operation life: Min. 24 hours
Light intensity: >0.75cd light
Service life: 5 years
Benefits & Features
• Automatically water activated and manual off switch
• High visibility orange color
• Supplied with a clip
• Operating temperature from -1 °C up to +30 °C
• Compatible with almost all standard lifejackets
• Made of waterproof ABS & Polycarbonate
Approval
• Wheelmark
Standards
• SOLAS/MED
• USCG
Koyro Lifebuoy light K36 is well known throughout the global market as a reliable and efficient lifebuoy light. Batteries are replaceable and the lifebuoy light comes with brackets. It is designed to withstand the toughest rigours of the maritime environment and is completely watertight, corrosion-resistant and delivers, as a minimum standard, an omnidirectional over 2CD output for a minimum of two hours. The lifebuoy light is marked with SolasFlex Retro Reflective Tape for better visibility.
Technical Data
Article number: LBL-K36
Dimensions: 79 x 79 x 171 mm
Weight: 245 g
Connecting line: 1,5 m
Light power source: 1 alkaline battery
Ignition method: Mercury switch
Benefits & Features
• Long lasting
• High visibility
• High safety
• Replaceable batteries
• Includes mounting brackets
• LED light
• Equipped with SolasFlex Retro Reflective Tape
Approvals
• Korean Register
• Wheelmark
Standards
• Complies with IMO / SOLAS MSC 81(70)
• Complies with MED Directive 96/98/EC and 2002/75/EC
The pilot ladder is used for the pilot and crews getting in and out the vessel in normal situations. The pilot ladder has a spreader which is different from the embarkation ladder. The steps of each ladder are made of hard wood except for the last 4 steps, which are made of rubber.
Technical data
Article number: PILOT
Step: Hardwood (beech wood)
The 4 lower steps of ladder are made of rubber
Spreader: Hardwood (beech wood)
Side Ropes: 4 Strand Manila rope
Step Thimbles: Hardwood (beech wood)
Rope clamp: Aluminium
Approvals
• Istituto Giordano
• Wheelmark
Standards
• Complies with IMO Res. A1045(27), MSC / Circ. 1428,
• ISO 799 (2004), SOLAS 74 Conv. as, amended Reg. V23, X/3
Please specify the required length of the pilot ladder in your quote.
An embarkation ladder extending from the deck to the waterline in the lightest seagoing condition under all conditions of a trim of up to 10° and a list of up to 20° either way, shall be provided at each embarkation station or at every two adjacent embarkation stations for survival craft launched down the side of the ship.
Technical data
Article number: EMBAR
Step: Hardwood (beech wood)
Spreader: Hardwood (beech wood) Side
Ropes: 4 Strand Manila rope
Step Thimbles: Hardwood (beech wood)
Rope clamp: Aluminium
Approvals
• Istituto Giordano
• Wheelmark
Standards
• Complies with IMO Res. A1045(27), MSC / Circ. 1428
• ISO 799 (2004), SOLAS 74 Conv. as, amended Reg. V23, X/3
Please specify the required length of the pilot ladder in your quote.
The T-ISS Magnet ladder locker is designed to create a safer environment for staff & harbour pilots by providing safely removable anchor points for the ladder on the ship’s side. The magnets are lightweight for easy handling, yet immensely strong, providing more than 500 KG of lift & pull ratings. The Magnet ladder locker is powder coated in bright orange for high visibility and is made to withstand the marine environment. It has no internal moving parts or entry points for sea water.
Technical Data
Lift rate: 500 kg
Pull rate: 520 kg
Benefits & Features
The release handle will enable crew to remove the magnet from the hull easily and without excessive force. All T-ISS Magnet ladder lockers are standard supplied in a sturdy wooden storage box and comes with an IMO-type instruction poster, Storage Location sign and tightening belts.
Set consists of:
• 2 pieces of the Magnet ladder locker
• 2 pieces of the Tightening Belt (IMPA 23.20.94)
• Sturdy wooden storage box
• IMO-type instruction poster / self-adhesive backing
• IMO-type location sign / self-adhesive backing
Approval
• DNV
Standards
• Complies with IMO / SOLAS A.1045(27)
[table id=12 /]
The Pneumatic ladder locker is used to secure the bottom of the accommodation ladder or gangway to the ship’s side. The locker works with a vacuum pressure, supplied from your deck air supply. The Pneumatic ladder locker is the tool to increase safety on high free board vessels when accommodation ladders are used by the crew or pilots.
Technical Data
Lift rate: 300 kg
Pull rate: 850 kg
Required: Compressor 1 HP or more
Benefits & Features
The Pneumatic ladder locker is supplied in a sturdy storage box and comes with IMO type storage sign and instruction poster. Also, an air hose connection is included as well as a tightening belt. A compressor with a minimum of 1 HP is powerful enough to supply this system.
Set consists of:
• Pneumatic ladder locker
• Tightening belt (IMPA 23.20.94)
• Sturdy wooden storage box
• IMO-type instruction poster / self-adhesive backing
• IMO-type location sign / self-adhesive backing
Approval
• DNV
Standards
• Complies with IMO / SOLAS A.1045(27)
[table id=13 /]
The BLT 250 Line thrower is a pneumatic system which throws projectiles by a compressed air system. It has 4 interchangeable launchers and the projectiles are easy to refill. Meets the demands of SOLAS/lMO regulation 74/83. Projectiles reaches approximately 250 meters, are only effected from crosswind and reach the maximum speed at the end of the launcher. All items are reusable and shelf life is unlimited. The only cost for four throws, is refilling the cylinder with your air compressor.
Technical data
Weight throwing unit 8,3 kg
Weight projectile 2,1 kg
Materials Aluminium, Stainless steel, MS58 Brass, PVC and ABS
Shooting chamber pressure 65 bar
Maximum Recoil 5400N
Average Nozzle Velocity 50,6m/s
Number of shots 4
Aluminium air cylinder pressure 200 bar
Aluminium air cylinder volume 2 l
Benefits & Features
• No explosion, useable from and into flammable areas
• Complete set (4 projectiles, throwing unit, user manual, sturdy orange carrying bag)
• Optional wooden storage box available
Approvals
• RINA
• USCG
• Wheelmark
Standards
• SOLAS/IMO regulation 74/83
[table id=14 /]
The T-ISS Emergency Leak and Seal repair kit is a complete response kit that enables immediate action when situations demand it. Leakage on flanges, on piping or even a leaking drum can be sealed quickly and efficiënt. A wrench and water are all that’s needed to use the ELS kit, no special training is required, but make sure the crew is familiar with the kit and working procedures. The ELS kit is versatile; use it for hazardous and non-hazardous chemical service.
The contents of the ELS kit:
• Sturdy plastic carrying box
• Rubber hammer
• Utility knife
• Speed steel stick
• Fast plastic stick
• Rubber sheet (500 x 500 mm)
• Drip Stop Tape (3 sizes: 25/38/50 mm)
• Spray Control Tape (50 mm)
• Spray Stop Tape (35 mm)
• Pipe Repair Tape (3 sizes: 2”,3”,4”)
• 3 pair of gloves
Technical data:
Article number: ELS-KIT
Dimensions: 475 x 215 x 265 mm
Weight: 7,2 kg
IMPA: 812368
The Asbestos safety kit, is a product to safely remove asbestos debris during the operation of a vessel. This product is used by a vessels crew to remove any harmful asbestos materials in a safe way, while the ship is operating at sea. The kit is not meant to be used for large scale asbestos removal, for example during the docking of the vessel. All items in the kit are produced according to the EU quality standards for asbestos removal. All parts are approved by certified companies. The kit comes with a clear instruction manual that shows how to use it in a safe and adequate way.
The Asbestos safety kit contains the following items:
• HEPA vacuum cleaner including cleaner bags
• Personal Protective Equipment (PPE)
• Asbestos waste bags
• Asbestos warning stickers
• Duct Tape
• Glue spray
• Spray bottle with impregnating fluid
• Full instruction manual
• All certificates
Approvals
• KIWA Oesterbaai
• DNV
• RINA
• BUREAU VERITAS
• Lloyd’s Register
Technical data:
Article number: ASB-KIT
Dimensions: 610 x 810 x 450 mm
Weight: 25 kg
IMPA: 330967