Spray Stop Anti-Splashing Tape 50+

Spray Stop Anti-Splashing Tape 50+

T-ISS Spray Stop Anti-Splashing Tape 50+ has a slight difference compared to the regular version. Standard Spray Stop Tape will hold pressure up to 15 bar. Spray Stop Anti-Splashing Tape 50+ extends this limit to 50 bar. This means the tape will be particularly suitable for tubing systems that transport liquids under high pressure. Of course this tape can be used under the same circumstances as our standard Spray Stop Anti-Splashing tape. Technical data Maximum pressure: 50 bar Maximum temperature: +160 ºC continuously +200 ºC shortly Adh. material tolerance: – 70 ºC up to 200 ºC Adhesion: 1000 g /…
Read More
Spray Stop Anti-Splashing Tape

Spray Stop Anti-Splashing Tape

T-ISS Spray Stop Anti-Splashing Tape is used for applications in the marine & offshore industry. This hightech laminated multilayer aluminium tape, has been designed by safety specialists in order to prevent spray outs of hazardous liquids (oil / fuel) from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations. According to SOLAS regulations, ships should apply appropriate protection to prevent leakage / splashing of flammable oil from FO, LO hydraulic and other systems. Technical data Maximum pressure: 15 bar Maximum temperature: +160 ºC continuously / +200 ºC shortly Adh. material tolerance: – 70…
Read More
Asbestos Safety Kit

Asbestos Safety Kit

The Asbestos safety kit, is a product to safely remove asbestos debris during the operation of a vessel. This product is used by a vessels crew to remove any harmful asbestos materials in a safe way, while the ship is operating at sea. The kit is not meant to be used for large scale asbestos removal, for example during the docking of the vessel. All items in the kit are produced according to the EU quality standards for asbestos removal. All parts are approved by certified companies. The kit comes with a clear instruction manual that shows how to use…
Read More
Emergency Leak and Seal Repair Kit

Emergency Leak and Seal Repair Kit

The T-ISS Emergency Leak and Seal repair kit is a complete response kit that enables immediate action when situations demand it. Leakage on flanges, on piping or even a leaking drum can be sealed quickly and efficiënt. A wrench and water are all that’s needed to use the ELS kit, no special training is required, but make sure the crew is familiar with the kit and working procedures. The ELS kit is versatile; use it for hazardous and non-hazardous chemical service. The contents of the ELS kit: • Sturdy plastic carrying box • Rubber hammer • Utility knife • Speed…
Read More
Pneumatic Line Thrower

Pneumatic Line Thrower

The BLT 250 Line thrower is a pneumatic system which throws projectiles by a compressed air system. It has 4 interchangeable launchers and the projectiles are easy to refill. Meets the demands of SOLAS/lMO regulation 74/83. Projectiles reaches approximately 250 meters, are only effected from crosswind and reach the maximum speed at the end of the launcher. All items are reusable and shelf life is unlimited. The only cost for four throws, is refilling the cylinder with your air compressor. Technical data Weight throwing unit 8,3 kg Weight projectile 2,1 kg Materials Aluminium, Stainless steel, MS58 Brass, PVC and ABS…
Read More
Pneumatic Ladder Locker

Pneumatic Ladder Locker

The Pneumatic ladder locker is used to secure the bottom of the accommodation ladder or gangway to the ship’s side. The locker works with a vacuum pressure, supplied from your deck air supply. The Pneumatic ladder locker is the tool to increase safety on high free board vessels when accommodation ladders are used by the crew or pilots. Technical Data Lift rate: 300 kg Pull rate: 850 kg Required: Compressor 1 HP or more Benefits & Features The Pneumatic ladder locker is supplied in a sturdy storage box and comes with IMO type storage sign and instruction poster. Also, an…
Read More
Magnet Ladder Locker

Magnet Ladder Locker

The T-ISS Magnet ladder locker is designed to create a safer environment for staff & harbour pilots by providing safely removable anchor points for the ladder on the ship’s side. The magnets are lightweight for easy handling, yet immensely strong, providing more than 500 KG of lift & pull ratings. The Magnet ladder locker is powder coated in bright orange for high visibility and is made to withstand the marine environment. It has no internal moving parts or entry points for sea water. Technical Data Lift rate: 500 kg Pull rate: 520 kg Benefits & Features The release handle will…
Read More
Embarkation Ladder

Embarkation Ladder

An embarkation ladder extending from the deck to the waterline in the lightest seagoing condition under all conditions of a trim of up to 10° and a list of up to 20° either way, shall be provided at each embarkation station or at every two adjacent embarkation stations for survival craft launched down the side of the ship. Technical data Article number: EMBAR Step: Hardwood (beech wood) Spreader: Hardwood (beech wood) Side Ropes: 4 Strand Manila rope Step Thimbles: Hardwood (beech wood) Rope clamp: Aluminium Approvals • Istituto Giordano • Wheelmark Standards • Complies with IMO Res. A1045(27), MSC /…
Read More
Pilot Ladder

Pilot Ladder

The pilot ladder is used for the pilot and crews getting in and out the vessel in normal situations. The pilot ladder has a spreader which is different from the embarkation ladder. The steps of each ladder are made of hard wood except for the last 4 steps, which are made of rubber. Technical data Article number: PILOT  Step: Hardwood (beech wood) The 4 lower steps of ladder are made of rubber Spreader: Hardwood (beech wood) Side Ropes: 4 Strand Manila rope Step Thimbles: Hardwood (beech wood) Rope clamp: Aluminium Approvals • Istituto Giordano • Wheelmark Standards • Complies with…
Read More
Lifebuoy Light

Lifebuoy Light

Koyro Lifebuoy light K36 is well known throughout the global market as a reliable and efficient lifebuoy light. Batteries are replaceable and the lifebuoy light comes with brackets. It is designed to withstand the toughest rigours of the maritime environment and is completely watertight, corrosion-resistant and delivers, as a minimum standard, an omnidirectional over 2CD output for a minimum of two hours. The lifebuoy light is marked with SolasFlex Retro Reflective Tape for better visibility. Technical Data Article number: LBL-K36 Dimensions: 79 x 79 x 171 mm Weight: 245 g Connecting line: 1,5 m Light power source: 1 alkaline battery…
Read More