The T-ISS SeaMate Ve-1 hydrostatic release unit is designed to operate in all conditions, from extreme heat to the polar environment. In the exceptional situation your vessel sinks, the T-ISS SeaMate Ve-1 will automatically release your life rafts and EPIRB’s.
Our innovative design increased the reliability, that’s why the T-ISS SeaMate Ve-1 has an expiry life of 3 years. This means you only replace the HRU every 3 years, instead of 2 years which is common. Besides the cost saving, this also reduces the environmental footprint. The T-ISS SeaMate Ve-1 hydrostatic release also fits on remote release systems, this enables you to release life rafts remotely. An EPIRB model is also available, delivered with the bolt and nut to connect the EPIRB to your vessel.
Technical data
Dimensions: 165 x 75 x 65 mm
Weight: Approx. 0,25 kg
Benefits & Features
The innovative design and the high quality of our HRU’s increased the reliability, which is why the T-ISS SeaMate Ve-1 has an expiry life of 3 years and can be used in all weather conditions, from extreme heat to the polar environment. This means you only have to replace the HRU every 3 years, instead of 2 years which is the standard. Besides cost saving, 3 years expiry also reduces the environmental impact. We can provide you with five different HRU models, each with a different application. A basic model for 6 to 150 pax, a basic model for 1 to 12 pax, an EPIRB model, a remote released model and a combi model.
Approvals
• Russian Register
• DNV
• USCG
• Korean Government
Standards
• In compliance with ISO 15734
[table id=1 /]
HRU Hooks
The HRU hooks are suitable for various HRU models and are made out of SS316, and have a breaking strength that complies with ISO6892. All hooks are packed in sets of 10 pieces.
[table id=2 /]
The T-ISS Liferaft / Rescue boat hook PX01 is a combined automatic release hook which can handle rescue boats and liferafts up to a safe working load of 35 kN. This hook can be used for rescue boats with a davit load less than 3500 kg and/or a davit launched liferaft up to 40 pax. The PX01 release hook has two modes of operation to allow for safe evacuation regardless of the conditions:
- Automatic release when the craft enters the water
- Manual release when waterborne if auto-release is not possible due to added load on the reserve boat while being towed or when sea conditions are bad
Technical data
Article number: RELHK-PX01
Maximum SWL: 3500 kg
Material: Stainless steel 316 / Duplex
Service life: 5 years
Dimensions: 260 x 260 x 70 mm
Weight: Approx. 8,5 kg
Benefits & Features
The PX01 will increase safety, as the crew only need to familiarize themselves with one hook, instead of two. There is no second hook, dangerously swinging around when lowering. In distress situations the crew will instantly know which hook to use, as there is only one hook. The most economical solution, why buy two hooks if one is sufficient?
Approvals
• RINA
• EC Directive 96/98EC on Marine Equipment (MED)
Standards
• LSA Code for Hooks for Liferaft Launching, as amended MSC.81(70).
• Fully compliant with updated SOLAS requirements as per Resolutions MSC.320(89) and MSC.321(80).
The T-ISS Liferaft release hook PX02 is an automatic release hook for davit launched liferafts, which can handle a safe working load of 25 kN. The hook can be operated as an automatic release hook, releasing when the raft enters the water, or as a manual release hook.
Technical data
Article number: RELHK-PX02
Maximum SWL: 2500 kg
Material: Stainless steel
Service life: 5 years
Dimensions: 300 x 190 x 90 mm
Weight: Approx. 8,2 kg
Approvals
• RINA
• EC Directive 96/98EC on Marine Equipment (MED)
Standards
• LSA Code for Hooks for Liferaft Launching, as amended MSC.81(70).
• Fully compliant with updated SOLAS requirements as per Resolutions MSC.320(89) and MSC.321(80).
The T-ISS Rescue boat hook PX03 is a manual release hook for rescue boats, which can handle a safe working load of 15 kN. The hook is easy to operate/maintain and comes with a 5 year service life. The hook is designed to be opened manually and can be operated by one person. By pushing the release handle in the upward position, the hook will open.
Technical data
Article number: RELHK-PX03
Maximum SWL: 1500 kg
Material: Stainless steel 316 / Duplex
Service life: 5 years
Dimensions: 260 x 135 x 60 mm
Weight: Approx. 4,5 kg
Approvals
• RINA
• EC Directive 96/98EC on Marine Equipment (MED)
Standards
• LSA Code for Hooks for Liferaft Launching, as amended MSC.81(70).
• Fully compliant with updated SOLAS requirements as per Resolutions MSC.320(89) and MSC.321(80).
Light, compact and easy to use, our Emergency Escape Breathing Device (EEBD) is perfectly adapted to confined spaces onboard your vessel. It’s designed to escape from toxic or oxygen deficit environments, which require easy and immediate donning. The EEBD is packed in a handy carrying bag. Positive pressure in the hood eliminates any risk of inhaling toxic gases. An alarm indicates when the air supply is about to run out.
Technical Data
Cylinder working pressure: 210 bar
Cylinder capacity: 3 l
Weight: EEDB 6 kg / Cabinet 4 kg
Duration: 15 minutes
Non-pressurized delivery
Benefits & Features
The T-ISS EEBD is intended to be used to escape from a machinery space and be carried by fire fighters to give personnel in need of assistance. An EEBD is not intended to be used for fire- fighting purposes or entering oxygen-deficit or toxic environments, for firefighters use our SCBA. This EEBD is designed according to Chapter 3 – Fire System Safety Code (FSSC)/2.2. A training version of this EEBD is also available.
Approvals (EEBD)
• DNV module B&D
• Wheelmark
• Lloyd’s Register & ABS approved cabinets.
Standards
• Complies with SOLAS 74 and reg. 11-2/13.3.4 and 13.4.3
• Complies with TS EN 1146/15 incl. A1, A2 and A3
[table id=7 /]
The SCBA is a Self-Contained Breathing Apparatus, with a six liter volume steel cylinder, positive pressure. This self-contained breating respirator is used by fire-fighters and emergency rescuers. The full package includes a steel cylinder, full face mask, back strap, supply valve, alarm whistle, pressure reducer and completely packed in a carrying bag. The alarm pressure is set at 46 Mpa.
Technical Data
Article number: SCBA-RIZK6/30
Pressure: 300 bar
Cylinder: Alloy steek, 6 l
Working time: 60 minutes
Dimensions: 700 x 300 x 480 mm
Weight: Approx. 16 kg
Approvals
• DNV MED module B&D
• Wheelmark
SOLAS regulations require a permanent display of the general arrangement plans on a ship’s bridge (GA plan, Fire Safety plan and Escape plan). The Rolalux VH01 Rolldown Cassette gives you the opportunity to store 1 up to 3 different plans in the space. It is required that the general arrangement plans are kept up-to-date. Because of this, the VH01 Rolldown allows for easy replacement of the plans. You can simply remove and replace all three plans in the Rolldown system easily. Safety and evacuation plans should be permanently available to support the captain and officers on ships above the 20 meters. On the drawings a number of things must be clearly highlighted:
- Where to find the control station on each deck
- Where parts of the ship are enclosed by fire resistant bulkheads
- And the general data of the fire alarm systems
Technical data
Material: aluminium anodised
Dimensions: 1000 x 125 x 130 mm
Weight: Approx. 5,0 kg
Benefits & Features
• Store 1-3 plans in the space
• Easy replacement of plans
• Meets SOLAS regulations (Chapter II-2, Regulation 15.2.4)
• Modern design and solid mechanism
• Ensures a clean, well-arranged bridge
• Wall or ceiling mount possible
• Other dimensions available on request
[table id=8 /]
The T-ISS Fire plan container is a watertight container that stores a copy of a fire plan and / or an escape route plan. As we’ve recognized that fire plan containers are damaged easily, we have developed a stainless steel fire plan container, which resists the harsh maritime environment. Fire and safetyplans must always be exhibited for the guidance of the ship’s crews showing clearly for each deck as required by the SOLAS Chapter II Reg. 15/2.4.1 and 2.4.2.
Technical Data
Art. number: FPC
Packaging: 2 containers / box
Dimensions: 980 x 100 mm
Weight: Approx. 2,2 kg
IMPA: 332613
ISSA: 7585200
Benefits & Features
• Will last your ships lifetime
• Resistant to weather influences unlike PVC/plastic containers
• Suitable for all the standard plan sizes
• Watertight / marine environment resist
• Stainless Steel container
• Comes with photoluminescent “Fire plan” or “Fire and Safety plan” sign and sticker
• Comes with wall mounting brackets
Standards
• Complies with IMO / SOLAS II-2 15/2.4.1 and 15/2.4.2.
The goal of the International shore connection is to keep a standby hose attachment to get a connection from shore or from other ships for onboard firefighting, in case there is a total failure of pumps onboard. While using the International shore connection, the sea water is supplied at a pre-decided pressure and is connected to the ship’s fire main.
Technical Data
Maximal pressure: 1.0 N / mm2
Thread thickness: 2”
Dimensions: 285 x 260 x 70 mm
Weight: 3 up to 7 kg
Benefits & Features
• Designed to last in the tough marine environment
• BMC glass fiber polyester box, flame retardant
• Cabinet door can be opened both the right and left direction
• Stainless Steel lock and hinges
• Comes with applied SafeSign sign with 5 year warranty, even on outdoor use
[table id=9 /]
The Besto 300 Newton inflatable twin chamber lifejacket is an automatically operated lifejacket designed in accordance with the latest SOLAS/MED requirements and is designed for use on open sea and in het most extreme weather conditions.
Technical data
Wearing size: 43+ kg
Buoyancy: 300N
CO2 cylinder: 2x 60 g
Benefits & Features
• Cordura cover and tailored design
• Strong zipper
• Twin chamber lifevest for optimal safety
• Fleece collar for extra comfort
• Orange and yellow model feature easy wipe clean fabric
• Double crotch strap
• Safety harness
• Standard system: Halkey Roberts V90000 or United Moulders MK5
• Also to be used when wearing heavy protective waterproof clothes
Approval
• Wheelmark
Standards
• SOLAS 74/96, IMO Res. MSC.48(66) & Res. MSC.54(66) and A689(17).
[table id=10 /]
The Besto 300 Newton inflatable professional style lifejacket is an ergonomic offshore working jacket and can be used in the most extreme weather condition. The lifejacket will always rotate the body so the airways are clear of the water.
This model has a good body fit due to the soft outer cover and special neck shape. The collar is strapped onto the back, this gives a comfortable neck fit. Also it gives a good neck/ head support when the jacket is inflated.
The jacket comes standard with a crotch strap to enhance performance and freeboard. The jackets are finished with edge binding all-around and has a floating capacity of 300N. The jackets are available in various colours.
Technical data
Wearing size: 40+ kg
Buoyancy: 300N
CO2 cylinder: 60 g
Benefits & Features
• Also to be used when wearing heavy protective waterproof clothes
• Automatic and manual activation
• Two reflective strips for better visibility
[table id=11 /]
The automatically water-activated LED lifejacket light with “off” function, is a 5-year lifejacket light DNV certified on alkaline batteries, simplifying light disposal on expiration. It significantly exceeds the requirements on brightness and duration. It’s a very compact and the thin design and equipped with light bubble/ dome, but the integrity of inflatable lifejackets will be maintained. It is delivered with a clip, which fits almost any lifejacket.
The light is deactivated by pressing the power button on the front side. If the light after disruption is brought back to automatic mode, and water contacts are dry, splash water on the contacts and the light goes on again. Activation and deactivation is clearly marked on the label.
Technical data
Article number: LJL-WA
Dimensions: 62 x 30 x 22 mm
Weight: 44g
IMPA: 330143
Flash frequency: 50-70 x per minute
Operation life: Min. 24 hours
Light intensity: >0.75cd light
Service life: 5 years
Benefits & Features
• Automatically water activated and manual off switch
• High visibility orange color
• Supplied with a clip
• Operating temperature from -1 °C up to +30 °C
• Compatible with almost all standard lifejackets
• Made of waterproof ABS & Polycarbonate
Approval
• Wheelmark
Standards
• SOLAS/MED
• USCG
Koyro Lifebuoy light K36 is well known throughout the global market as a reliable and efficient lifebuoy light. Batteries are replaceable and the lifebuoy light comes with brackets. It is designed to withstand the toughest rigours of the maritime environment and is completely watertight, corrosion-resistant and delivers, as a minimum standard, an omnidirectional over 2CD output for a minimum of two hours. The lifebuoy light is marked with SolasFlex Retro Reflective Tape for better visibility.
Technical Data
Article number: LBL-K36
Dimensions: 79 x 79 x 171 mm
Weight: 245 g
Connecting line: 1,5 m
Light power source: 1 alkaline battery
Ignition method: Mercury switch
Benefits & Features
• Long lasting
• High visibility
• High safety
• Replaceable batteries
• Includes mounting brackets
• LED light
• Equipped with SolasFlex Retro Reflective Tape
Approvals
• Korean Register
• Wheelmark
Standards
• Complies with IMO / SOLAS MSC 81(70)
• Complies with MED Directive 96/98/EC and 2002/75/EC
The pilot ladder is used for the pilot and crews getting in and out the vessel in normal situations. The pilot ladder has a spreader which is different from the embarkation ladder. The steps of each ladder are made of hard wood except for the last 4 steps, which are made of rubber.
Technical data
Article number: PILOT
Step: Hardwood (beech wood)
The 4 lower steps of ladder are made of rubber
Spreader: Hardwood (beech wood)
Side Ropes: 4 Strand Manila rope
Step Thimbles: Hardwood (beech wood)
Rope clamp: Aluminium
Approvals
• Istituto Giordano
• Wheelmark
Standards
• Complies with IMO Res. A1045(27), MSC / Circ. 1428,
• ISO 799 (2004), SOLAS 74 Conv. as, amended Reg. V23, X/3
Please specify the required length of the pilot ladder in your quote.
An embarkation ladder extending from the deck to the waterline in the lightest seagoing condition under all conditions of a trim of up to 10° and a list of up to 20° either way, shall be provided at each embarkation station or at every two adjacent embarkation stations for survival craft launched down the side of the ship.
Technical data
Article number: EMBAR
Step: Hardwood (beech wood)
Spreader: Hardwood (beech wood) Side
Ropes: 4 Strand Manila rope
Step Thimbles: Hardwood (beech wood)
Rope clamp: Aluminium
Approvals
• Istituto Giordano
• Wheelmark
Standards
• Complies with IMO Res. A1045(27), MSC / Circ. 1428
• ISO 799 (2004), SOLAS 74 Conv. as, amended Reg. V23, X/3
Please specify the required length of the pilot ladder in your quote.
The T-ISS Magnet ladder locker is designed to create a safer environment for staff & harbour pilots by providing safely removable anchor points for the ladder on the ship’s side. The magnets are lightweight for easy handling, yet immensely strong, providing more than 500 KG of lift & pull ratings. The Magnet ladder locker is powder coated in bright orange for high visibility and is made to withstand the marine environment. It has no internal moving parts or entry points for sea water.
Technical Data
Lift rate: 500 kg
Pull rate: 520 kg
Benefits & Features
The release handle will enable crew to remove the magnet from the hull easily and without excessive force. All T-ISS Magnet ladder lockers are standard supplied in a sturdy wooden storage box and comes with an IMO-type instruction poster, Storage Location sign and tightening belts.
Set consists of:
• 2 pieces of the Magnet ladder locker
• 2 pieces of the Tightening Belt (IMPA 23.20.94)
• Sturdy wooden storage box
• IMO-type instruction poster / self-adhesive backing
• IMO-type location sign / self-adhesive backing
Approval
• DNV
Standards
• Complies with IMO / SOLAS A.1045(27)
[table id=12 /]
The Pneumatic ladder locker is used to secure the bottom of the accommodation ladder or gangway to the ship’s side. The locker works with a vacuum pressure, supplied from your deck air supply. The Pneumatic ladder locker is the tool to increase safety on high free board vessels when accommodation ladders are used by the crew or pilots.
Technical Data
Lift rate: 300 kg
Pull rate: 850 kg
Required: Compressor 1 HP or more
Benefits & Features
The Pneumatic ladder locker is supplied in a sturdy storage box and comes with IMO type storage sign and instruction poster. Also, an air hose connection is included as well as a tightening belt. A compressor with a minimum of 1 HP is powerful enough to supply this system.
Set consists of:
• Pneumatic ladder locker
• Tightening belt (IMPA 23.20.94)
• Sturdy wooden storage box
• IMO-type instruction poster / self-adhesive backing
• IMO-type location sign / self-adhesive backing
Approval
• DNV
Standards
• Complies with IMO / SOLAS A.1045(27)
[table id=13 /]
The BLT 250 Line thrower is a pneumatic system which throws projectiles by a compressed air system. It has 4 interchangeable launchers and the projectiles are easy to refill. Meets the demands of SOLAS/lMO regulation 74/83. Projectiles reaches approximately 250 meters, are only effected from crosswind and reach the maximum speed at the end of the launcher. All items are reusable and shelf life is unlimited. The only cost for four throws, is refilling the cylinder with your air compressor.
Technical data
Weight throwing unit 8,3 kg
Weight projectile 2,1 kg
Materials Aluminium, Stainless steel, MS58 Brass, PVC and ABS
Shooting chamber pressure 65 bar
Maximum Recoil 5400N
Average Nozzle Velocity 50,6m/s
Number of shots 4
Aluminium air cylinder pressure 200 bar
Aluminium air cylinder volume 2 l
Benefits & Features
• No explosion, useable from and into flammable areas
• Complete set (4 projectiles, throwing unit, user manual, sturdy orange carrying bag)
• Optional wooden storage box available
Approvals
• RINA
• USCG
• Wheelmark
Standards
• SOLAS/IMO regulation 74/83
[table id=14 /]
The T-ISS Emergency Leak and Seal repair kit is a complete response kit that enables immediate action when situations demand it. Leakage on flanges, on piping or even a leaking drum can be sealed quickly and efficiënt. A wrench and water are all that’s needed to use the ELS kit, no special training is required, but make sure the crew is familiar with the kit and working procedures. The ELS kit is versatile; use it for hazardous and non-hazardous chemical service.
The contents of the ELS kit:
• Sturdy plastic carrying box
• Rubber hammer
• Utility knife
• Speed steel stick
• Fast plastic stick
• Rubber sheet (500 x 500 mm)
• Drip Stop Tape (3 sizes: 25/38/50 mm)
• Spray Control Tape (50 mm)
• Spray Stop Tape (35 mm)
• Pipe Repair Tape (3 sizes: 2”,3”,4”)
• 3 pair of gloves
Technical data:
Article number: ELS-KIT
Dimensions: 475 x 215 x 265 mm
Weight: 7,2 kg
IMPA: 812368
The Asbestos safety kit, is a product to safely remove asbestos debris during the operation of a vessel. This product is used by a vessels crew to remove any harmful asbestos materials in a safe way, while the ship is operating at sea. The kit is not meant to be used for large scale asbestos removal, for example during the docking of the vessel. All items in the kit are produced according to the EU quality standards for asbestos removal. All parts are approved by certified companies. The kit comes with a clear instruction manual that shows how to use it in a safe and adequate way.
The Asbestos safety kit contains the following items:
• HEPA vacuum cleaner including cleaner bags
• Personal Protective Equipment (PPE)
• Asbestos waste bags
• Asbestos warning stickers
• Duct Tape
• Glue spray
• Spray bottle with impregnating fluid
• Full instruction manual
• All certificates
Approvals
• KIWA Oesterbaai
• DNV
• RINA
• BUREAU VERITAS
• Lloyd’s Register
Technical data:
Article number: ASB-KIT
Dimensions: 610 x 810 x 450 mm
Weight: 25 kg
IMPA: 330967
T-ISS Spray Stop Anti-Splashing Tape is used for applications in the marine & offshore industry. This hightech laminated multilayer aluminium tape, has been designed by safety specialists in order to prevent spray outs of hazardous liquids (oil / fuel) from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations. According to SOLAS regulations, ships should apply appropriate protection to prevent leakage / splashing of flammable oil from FO, LO hydraulic and other systems.
Technical data
Maximum pressure: 15 bar
Maximum temperature: +160 ºC continuously / +200 ºC shortly
Adh. material tolerance: – 70 ºC up to 200 ºC
Adhesion: 1000 g / 25 mm
Shelf life: 3 years
Approvals
• Bureau Veritas
• Lloyd’s Register
• DNV
• RINA
• CLassNK
• ABS
• KR
• CCS
Standards
• Complies with the IMO A653 (16)
[table id=16 /]
Note; other widths available on request
T-ISS Spray Stop Anti-Splashing Tape 50+ has a slight difference compared to the regular version. Standard Spray Stop Tape will hold pressure up to 15 bar. Spray Stop Anti-Splashing Tape 50+ extends this limit to 50 bar. This means the tape will be particularly suitable for tubing systems that transport liquids under high pressure. Of course this tape can be used under the same circumstances as our standard Spray Stop Anti-Splashing tape.
Technical data
Maximum pressure: 50 bar
Maximum temperature: +160 ºC continuously +200 ºC shortly
Adh. material tolerance: – 70 ºC up to 200 ºC
Adhesion: 1000 g / 25 mm
Shelf life: 3 years
Approvals
• Bureau Veritas
• Lloyd’s Register
• DNV
• RINA
• CLassNK
• ABS
• KR
• CCS
Standards
• Complies with the IMO A653 (16)
[table id=17 /]
Note; other widths available on request
T-ISS Spray Control Tape is used to upgrade the safety in your pipeline systems. The protection tape makes surroundings a lot safer. Spray Control is made to prevent damages towards human, machinery and pipes by applying the tapes on flanges & valves at chemical plants. The pre-leak detection would help to save unnecessary expenditure for maintenance and repairing. Compared to Spray Shields & Flange Guards, the product can be directly used without any trial chore.
Technical data
Max. temperature resistance: -30 °C up to 75 °C
Pressure resistance: Up to 35 bar
Material: Multilayer reinforced high grade vinyl
Thickness: 1 mm
[table id=18 /]
T-ISS Drip Stop Tape is easy to use, not using any adhesive components and it will not stick to the hand. The tape is made to stick on components. When applying it needs an overlap of half the width on the tape. The full cure time is approximately 20 – 30 minutes.
Drip Stop Tape can be used even on wet surfaces and pressurized leaking piping up to maximum 3 kg/cm². It will even work under water. When being used in wet areas, it must be winded very tightly. The tape can also be used as a protection layer to prevent corrosion or as electric insulation.
Technical data
Tensile strength: 32,8 kg / cm²
Elongation at brake: 435%
Volume resistivity: 6,1 x 10,150
Dielectric strength: 21 kV / mm
Dielectric constant: 0,03
Dissipation factor: 2,01
Thickness: 0,1 mm
[table id=19 /]
T-ISS Pipe Repair Tape is a specially developed resin coated glass fiber cloth, which will set also under water. The fiberglass cloth tape is impregnated with a water activated resin prior to packaging. Normal setting time is approximately 20 minutes, depending on the temperature. The activator is normal salt or fresh water. This repair product sets even under water and because of this, it is ideal to use in difficult / wet applications. T-ISS Pipe Repair Tape can be used for corrosion prevention, reinforcement and electrical protection up to 16,000 volts.
Technical data
Maximum pressure: 10 bar
Maximum temperature: 200 ºC
One pack of T-ISS Pipe Repair Tape comes with:
• Pipe Repair pouch
• Pipe Repair FastSteel putty
• One pair of protective gloves
• Instruction manual
Certificate
• Water Regulations Advisory Scheme (WRAS)
[table id=20 /]
T-ISS SolasFlex Retro Reflective Tape is used for the reflection of SOLAS life saving appliances such as life jackets, life rafts or life boats. Our SolasFlex Retro Reflective Tape is an encapsulated lens sheet provided with a flexible and fully transparent plastic foil. The tape is specially designed for the marine / offshore industry, has a long life span, high clarity and antielamination. All our reflective tapes consist of an encapsulated optical design with a high reflective value that is clearly visible from every angle, both in dry and wet conditions.
Our SolasFlex Retro Reflective Tape is type II approved according IMO A658(16), this means it can be used indoor as well as outdoor and is suitable for all applications, extreme weather conditions and continuous outdoor exposure.
By applying SolasFlex Retro Reflective Tape the life saving appliances will be highly visible, when for example helicopter lights are used to search for these objects. The tape is available as self-adhesive and stitchable.
Technical data
Thickness: 0,1 mm
Benefits & Features
• Three different colors
• Tape reflects a clear bright white light
• High reflectivity over a wide range of entrance angles
• Type 2 Solasgrade reflectivity (indoor/outdoor use)
• Other widths available on request
Approvals
• USCG
• DNV
• Wheelmark
• Russian Register
• Korean Register
Standards
• Complies with IMO Res. A658(16) and meets USCG specification 46 CFR Part 164.
[table id=21 /]
This high-quality self-adhesive Marine Reflective Tape meets several requirements, such as impact resistance and UV protection. The tape is made up of several layers of minuscule prisms which reflect the light perfectly and can be applied to various materials such as steel, plastic, aluminium, fibreglass, etc.
[table id=23 /]
T-ISS Safety Marking Tape Reflective is an engineering grade reflective tape, used to provide safety and protection. Used to highlight hazards, it is over 200 times more reflective than white paint. Suitable for highlighting hazards and danger areas. Gives a 24/7 protection in and on your vessel.
Technical data
Material: PVC
Adhesive side: Single sided
Purpose: Warning and marking
Benefits & Features
• High visibility
• Providing optimal safety to prevent hazardous situations and accidents
[table id=24 /]
Anti-Slip Tape helps to protect slippery surfaces and to prevent accidents. This tape offers safe working and walking by when applied on stairs and walkways, both indoor and outdoor. Anti-Slip Tape is a mineral coated plastic film with a pressure sensitive adhesive protected by a removable liner. The tape is made using aluminium oxide mineral particles and has a solvent acrylic adhesive material. The tape can be applied in a temperature between 5 °C and 50 °C.
Technical data
Thickness: 0,8 mm tape + 1 – 0,2 mm grit
Steel adhesion: 1500 g / 25 mm
Tensile strength: 6 kg / 25 mm
Elongation / break: 2596
Application temp: 5 °C up to 50 °C
[table id=25 /]
Floor Marking Tape is a tape that was designed for marking floors and walkways to highlight safety hazards. Our Floor Marking Tape has an extremely high durability towards tough surroundings with its excellent adhesive quality. Marking dangerous areas with this floor tape is the first step to increase safety.
Technical data
Material: PVC
Adhesive: Natural rubber adhesive
Carrier: 0.135 mm
PVC Film Appl. temp: 0-50 °C
Total thickness: 0.15 mm
Temperature: 0-90 °C
Tensile strength: 25 N / cm
Elongation: 150 %
[table id=26 /]
Barrier Tape can be used for depositing, marking prohibited or dangerous places. The red/white or black/yellow barrier tape is popular because of the striking hazard colors.
Technical data
Material: Flexible PVC barrier tape
Length: 500 m
Weight: 950 gr
Adhesion: Non-adhesive
Thickness: 0,03 mm
Benefits & Features
Barrier tape comes in a convenient dispenser box which allows you to obtain the tape length you need, rip off that part, and store the dispenser box in a suitable place. Ideal for tying to fencing, cones & other fixed points.
[table id=27 /]
T-ISS manufactures various photoluminescent tapes to indicate escape routes on cruise ships, oil tankers, ferries, roll-on/roll-off ships and many other vessel types. These tapes are being made using PVC, PU or PET materials.
The PU material tape is especially used for applications with rounded surfaces and locations where heavy duty materials are required.
All the photoluminescent tapes complies with the IMO & SOLAS regulations. They have a strong adhesive layer which ensures an extremely good adhesion on many different substrates. The tapes are specially designed for mounting on board of ships and have excellent aging and weather resistant properties. Because of these properties the tapes are suitable for both indoor and outdoor applications/usage. The photoluminescent tapes are not only applicable in the maritime and offshore sector but also in the installation business, such as office buildings and hallways.
Technical data
Elongation 24%
Weight: 300 g – 40 mm, 375 g – 50 mm, 600 g – 80 mm
Thickness: 0,175 mm
Tensile strength: Approx. 5 kg
[table id=28 /]
Approvals
• Wheelmark
• DNV
Standards
• The product complies with IMO A752(18) and ISO 15370 which include ships and marine technology / low location lighting on passenger ships arrangements.
[table id=29 /]
[table id=30 /]
[table id=31 /]
[table id=32 /]
Safety Marking Tape Photoluminescent is used to show contours in spaces. The outlines of (emergency) exits, obstacles and areas to be kept clear or for example, fire extinguishers can be marked with luminous Safety Marking Tapes.
The Safety Marking Tapes Photolimuniescent complies with the IMO & SOLAS regulations, have a strong adhesive layer and are suitable for both indoor and outdoor applications/usage.
Technical data
Elongation 24%
Weight: 300 g – 40 mm / 600 g – 80 mm
Thickness: 0,175 mm
Tensile strength: Approx. 5 kg
[table id=28 /]
Standards
• The product complies with IMO A752(18) and ISO 15370 which include ships and marine technology / low location lighting on passenger ships arrangements.
[table id=33 /]
[table id=34 /]
[table id=35 /]
We offers various layouts of reliable Security Seal Tapes, also called warranty void labels. These are made of tamper evident destructible PET. When using this Security Seal Tape, you can quickly see if your goods have been tampered with. It shows the “OPEN VOID” hidden security message as soon as the warranty tape is removed from the surface of a carton box of other applications. These SecuSeal Tapes seal of and provide extra protection.
Our Security Seal Tape can be applied to a large range of surfaces including paper, card, metal, glass and many more. Void tapes are mainly used for forensic intelligence investigation, military, banking security, aviation security, medical packaging seals, electronic goods protection and other.
Technical data
Adhesion: Pressure sensitive
Minimum Shelf life: 2 years
Thickness: 25 Micron
Color: Various colour’s, layouts and sizes are possible according to the customers demands. Production of individual labels or on roll.
Also custom made labels possible.
Material: PET, Halogen free, NON-PVC
Benefits & Features
Security Seal Tapes help you to reveal tampering or unauthorized access. High value goods need to have a security/safety seal. This seal protects the luxury goods from theft and fraud during shipment and storage. Our Security Seal Tapes reveal the hidden security message when tampering has occurred. Even if someone tries to replace it, the void tape will show that an individual attempted to break into it.
Security Seal Tape (open void tape) provides the best solution when evidence is required of tampering. Our guarantee seal or guarantee tape provide a visible indication of attempt of removal. After removing, since most of adhesive remains on the surface (and little to none on the tape film), the tape film cannot be reused, which is an added security feature against unauthorized reuse of the tape.
[table id=36 /]
Biosoluble Heat Stop Tape is a revolutionary new environmental friendly tape and is used for insulation of hot piping systems on board ships. It was specially invented to replace the ceramic fiber tape in the maritime sectors. Biosoluble Heat Stop Tape is made of a biosoluble fiber chemical composition which is different from regular ceramic fiber, the biosoluble fiber has a better performance and it is biodegradable. It protects surfaces and lowers temperatures in a highly effective way.
Biosoluble Heat Stop Tape is a woven fabric made of superior biosoluble fiber. This special tape contains about 15-18% binder materials which gives it superior heat resistance. Inwoven stainless steel wire and the fiberglass filament inside will keep the biosoluble fiber tape high temperature performance when it is used.
Benefits & Features
• No cracking and no hardening
• Cold and wet surface application is possible
• ECO friendly
• Temperature resistance: 1000 °C
Standards
• Meets SOLAS Regulation II/2/12.2.10
• Complies with MSC 61 (67)
• GTS Verification of Compliance
• EN 14306:2009 + A1:2013
[table id=37 /]
Corrosion Stop Zinc Tape will prevent galvanic corrosion and protects new and existing steel parts such as bridge supports, pipelines and other marine structures. Corrosion Stop Zinc Tape is made of a high purity zinc with a high tack self-adhesive backing.
Corrosion Stop Zinc Tape has a sacrificing role in the oxidation process. Instead of the two metals that are attached to each other, the tape will oxidize and so protect the two other metals. The same principle is put into practice on vessels; anodes are placed on the ship’s hull. These anodes will rust instead of the hull which results in a hull that’s rust-free for a longer period of time.
Technical data
Material: Zinc layer (39%)
Adhesive: Acrylate
Adhesion to steel: >70N /100 mm
Thickness: 0,1 mm zinc, 0,05 mm adhesive
Temp. resistance: up to 115 ºC
Shelf life: 12 months
Benefits & Features
The zinc layer on the tape will not be infiltrated by water, gas, etc. Also, the tape will not age due to UV light so there will be no corrosion from the inner layer.
[table id=38 /]
Rust Stop Petro Tape is an anti-corrosion tape which can be applied to all types of steel and steel structures, including pipes and pipelines. The tape provides an excellent resistance to water, acids, alkalies and salts. It is an appropriate long-term solution against corrosion. Even under water, under the ground and in harsh weather conditions, the tape retains its excellent properties and won’t peel, harden or crack. The tape is easy to apply and requires a very short processing time. The tape is solvent-free and 1,2 mm thick.
[table id=39 /]
Extreme weather conditions can cause leakage of your hatch covers, which can lead to damage of the cargo being transported. Hatch Cover Blueliner Tape keeps moisture out and ensures a tight seal that’s weather and smoke resistant. The tape has an extraordinary strength, great adhesion and is extremely flexible. The tape is easily recognizable by the blue top layer of modified PE material. This material gives the highest protection under extreme conditions.
Technical data
Characteristic: 20 m / self-adhesive SBS bitumenrubber coated
Heat resistance: -15 °C up to 40 °C
Shelf life: 2 years
Thickness: 2 mm
Benefits & Features
Hatch Cover Blueliner Tape is tested under practical environments and extreme weather conditions. The tape can be installed between 5 °C and 40 °C, and can withstand -15 to 70 °C. Rolls are 20 meter of self-adhesive SBS bitumen rubber compound, coated to a modified blue PE liner and with a release PE Liner.
[table id=40 /]
Foam Mounting Tapes are closed-cell, polyethylene foam, coated with a high tack / high shear acrylic adhesive. It has superior chemical and fuel resistance, and good outdoor weather resistance. It has excellent adhesive performance in the area of tack, sheer and adhesion.
High tack permanent adhesive with excellent aging and weather resistant properties specifically designed for mounting and joining nameplates, plastic trim, signs and emblems. Used on board of all types of vessels to install signage or to fix products to a surface.
Technical data
Peel adhesion: PSTC-3.1.8 kg / 25 mm
Shear strength: PSTC-7 over 72 hours
Heat resistance: Over 24 hours
Service temperature: -30 ºC ~ 120 ºC
Strength: 1.8 kg/25 mm
Thickness: 1 mm
[table id=41 /]
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Escape route signs with corresponding article numbers. These can be found on pages 84 to 93 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!Here you will find some examples of our Escape Route Signs. Each SafeSign category has different signs available.
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Rescue signs with corresponding article numbers. These can be found on pages 94 to 98 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!Here you will find some examples of our Escape Route Signs. Each SafeSign category has different signs available.
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Fire Fighting signs with corresponding article numbers. These can be found on pages 99 to 103 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Fire Control signs with corresponding article numbers. These can be found on pages 104 to 113 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Warning signs with corresponding article numbers. These can be found on pages 114 to 118 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Prohibition signs with corresponding article numbers. These can be found on pages 119 to 124 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Mandatory signs with corresponding article numbers. These can be found on pages 125 to 130 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Multiple signs with corresponding article numbers. These can be found on pages 131 to 139 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Multiple signs custom made with corresponding article numbers. These can be found on pages 140 and 141 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Car Deck signs with corresponding article numbers. These can be found on pages 142 and 143 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
SOLAS Part 1, Chapter III-part B. regulation 8.4 and MSC/Circ. 699 requires installation and instructions in appropriate languages pasted in cabins, assembly stations and other passenger spaces showing the ‘you are here’ position and escape routes marked by arrows displayed on the inside of each cabin door and in public spaces. The plan shall show the directions of escape and shall be properly oriented in relation to its position on the ship.
IMO A.752(18) requires a placard explaining the LLL system in all cabins. The basics for engineering a Safety Instruction sign comes from the ship’s embarkation and rescue plan and from the ISO principles of designing an evacuation plan.
Cabin Safety Instructions
The Safety Instruction sign in a cabin displays the primary and alternative route to the designated assembly station, displayed in both plan view and sideview, emergency instructions and donning instructions for the lifejackets.
The displayed primary and alternative escape routes must be in full compliance with the signs at the LLL system and escape signs on eye height and according the ships embarkation plan.
Safety Instructions Public Space
The Safety Instructions for the public areas show where you are in relation to the assembly stations, the instructions in case of emergency and near the lifejacket storage areas, the instructions for putting on the lifejackets. This plan also shows in a plan view the positions of the lifeboats, embarkation stations and life jacket stowage areas on the respective decks.
We can provide the engineering and drawing work for the Safety Instructions fully in line with the complete escape route system, consisting of the LLL with their mini symbols, photoluminescent and electrical escape route symbols and the instructions explaining the symbols used and other relevant information.
The Safety Instructions can be designed in the company’s corporate style with their logos or in a neutral ISO recommended style.
We offer several options to execute the safety instructions:
• PET-X vandalism resistant and glossy appearance
• PET-X photoluminescent, vandalism resistant and glossy appearance
• Click frames for easy changing of new revisions
• Vinyl sticker
• Other luxury options such as brushed Stainless Steel or polished brass
Click frames
Quick and easy to exchange plans for:
• Safety instructions
• Fire Control plans
• Damage control plans
• Embarkation plans
• Muster lists
• General arrangements
CLF20S4 A4 (20 mm profile)
CLF20S3 A3 (20 mm profile)
CLF20S2 A2 (20 mm profile)
CLF32S1 A1 (32 mm profile)
CLF32S0 A0 (32 mm profile)
CLFCM Dimensions on request (max. size 3000 x 1500 mm)
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available ISPS signs with corresponding article numbers. These can be found on pages 147 and 148 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different IMO Psoers. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available IMO Posters with corresponding article numbers. These can be found on pages 149 to 153 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Tie tags are needed when objects and areas need to be marked temporarily for safety reasons, usually during maintenance work.
These labels are printed on flexible matte PVC, so they can be written on.
The labels are supplied in packs of ten. On page 154 of the new catalog you will find which tie tags we can supply with corresponding article code.
Under the brand name SafeSign we offer environmentally friendly, back-printed photoluminescent PETX signage products. In our new catalog you will find an overview with al the different categories of our safety signs. Which you can preview online, download or sent us a request if you would like to receive the full catalog in hardcopy.
In this specific category you will find all available Public Information signs with corresponding article numbers. These can be found on pages 155 and 156 of the new IMO Catalog.
How our sign products compare to other suppliers on the market:
– All signs are Halogen and PVC free
– 100% environmentally friendly and recyclable
– Back printed, for durability
– Glossy, quality finish, easy to wipe clean
– Easy to mount, always with self-adhesive backing
– 5-year warranty, even on outdoor use!
Ship signal flags are international signals used by ships at sea to spell out short messages. They can also be used separately or in combination, giving them special meanings. The use of sea signal flags is based on the International Signal Book (ICS).
The standard size is 1500 x 1000 mm and we have all flags on stock.
For a complete overview of the flags see page 157 of the IMO Catalog.
Most safety signs can be mounted directly on walls or wall panels. Sometimes this is not possible because they have to be placed between a railing, at a right angle to the wall or on the ceiling.
We have various mounting materials available for all these specific signs, including railing brackets, mounting panels right angled, panoramic or as triangle box. But also special mounting sealant, foam mounting tape and special card holders for security level indication.
You can find these available mounting materials on pages 158 and 159 of our IMO Catalog.
Electrical Low Location Lighting systems can be installed both floor-mounted or wall-mounted. Electrical Low Location Lighting systems are considered ‘active’ systems, compared to ‘passive’ LLL systems made of photoluminescent material.
Certification and approvals
Low Location Lighting systems comply with the environmental conditions and test procedures as defined in the requirements of the current editions of:
• IEC Pub. 598-2-22
• Regulation for the Performance of Type Tests for Electric Appliances Components
• Type Approval of Instrumentation and Automation Equipment, DNV.
• Type Approval System, Lloyds Register (LR)
Technical data LED-strip
• Standard LED-distance: 200 mm
• “High brightness” LEDs in colour “true green” (540 mcd. minimum)
• IP Grade: IP 67
• Operating temp.: – 15° C to + 55° C
• Life time: > 150.000 hours
• Due to high flexibility, the LED-strip can follow even 90° corners or tight curves without any electrical interruption
For more information and application possibilities, please contact us via the contact form or email info@nordicseasafe.com.
Our LLL Slot Strips are specialy designed with predrilled holes which allows you to install them on the roughest services.
Technical data
Article number: ALUSLOT4
Dimensions: 1000 mm x 50 mm
Material: Aluminium
Quality: XXL
The PU guideline is extremely flexible and can be used for the marking of stairs, stairnoses and contourmarking. It has an anti-slip surface and is resistant against most chemicals. It can be fixed with doublesided foam tape or glue.
Technical data
Article number: LLPUG
Width: 40 mm, insertstrip 35 mm
Afterglow: 10 min. 200 mcd/m² – 60 min. 28 mcd/m²
Dimensions: 40 mm x 10 m
Photoluminescent aluminium traildots for marking routes with or without arrow. In diameter 90 mm or 200 mm. All trialdots have a self-adhesive backing. Also available: a special mounting bracked designed for anti-skid traildots to fix on metal staircases. Please contact us for more information of these mouning brackeds.
[table id=50 /]
The Photoluminescent rope is made out of photoluminescent pigment and high quality resin. After absorbing visible light, the Photoluminescent rope will glow for 8 up to 12 hours in the darkness.
[table id=49 /]
Luminous stair step signs for marking stairs in escape routes mainly include stair step strips, side edge markers and round wall or floordots. Like regular stair step strips, our photoluminescent stair step strips also has an anti-slip coating which will reduce falling or tripping. The strips clearly display the steps at night or during a power failure.
[table id=46 /]
[table id=48 /]
Including a self adhesive backing and 90 degrees angle.
Our LightLine LLL Profile System is a system consisting of an extruded aluminium carrier and rigid photoluminescent strips. We have two different types of profiles at our range; an angled or a flat profile containing a 55,4 mm wide visible backlighting strip. The performance of the rigid panels is certified by DNV.
The flat profile is made of anodized aluminium and contains a central channel in which a strip of photoluminescent material is inserted. End caps are available to protect the ends of the profile. The angled profile is slightly angled away from the vertical to allow the photoluminescent strip to catch more light.
Approvals
• DNV
• Wheelmark
Standards
• Complies with IMO Resolution A. 752 (18) and ISO standard 15370
[table id=45 /]
The LightLine LLL System is the easiest and most cost effective Low Location Lighting system to install, requiring only the application of the LLL strips where needed. Cutting on required lengths can be done easily with a knife. The system is finalized by positioning the LLL signs/stickers at the right places. When you choose to install our LightLine system, time savings up to 200% can be achieved.
LightLine Pet-X photoluminescent strips are Non PVC/ Halogen-free plastic strips with backlighting material and a strong self-adhesive foam tape on the back. The material has a ‘glossy’ finish which is easy to clean and gives it a high quality appearance. The LightLine strips are available with or without 5mm safety green edges at the top and bottom of the strips.
LightLine strips have a standard length of 99 cm, 50 mm height, 1,5 mm thick and are produced with the high luminescence class XXL. All strips have a self-adhesive backing for easy fixing during new builds or refurbishment projects. LightLine strips are besides Non PVC/halogen-free, flame retardant and therefore exceeding all current requirements. Upon request we can manufacture LightLine strips in other widths and/or with other coloured marking stripes.
Approvals
• DNV MED
• Wheelmark
• Korean Register
Standards
• Complies with IMO Resolution A. 752 (18) and ISO standard 15370
[table id=44 /]
Note; The width of the photoluminescent material in the strips with the green edges is shown in parentheses, the width of the green edges is 2 x 5 mm.
Our ‘Dutch Design’ premium quality range of LED Escape signs are designed to clearly identify escape routes, executed in a timeless design that fits in with contemporary naval architecture. Our range of LED Escape signs allow for easy installation and provide a reliable and stylish solution for use onboard cruise ships, ferries, offshore installations and commercial ships.
The LED Escape signs are IP44 protected, CE and RINA approved and are available in two formats, recessed and surface mounted, offering ‘fit and forget’ LED technology providing a long lifespan of at least 40.000 hours.
Electrical and photoluminescent in one: the best of both worlds
As a result of an innovation that comes from our many years of experience in supplying various markets with photoluminescent signs and Low Location Lighting, we have combined two techniques in our SafeSign LED Escape signs; the main power source is electricity, but when the power is lost as a result of a calamity, the photoluminescent capabilities of the sign take over, providing the users with a very clear sign to the exit.
Technical data
Input voltage: AC 90~240V 50~60HZ
Power: 4W
Lifespan: +40.000hrs
Viewing distance: > 24 m
Class: CE approved
Protection: IP44
Material: Flame retardant ABS plastic
Extra: Exchangeable signs upon request
Frame color: RAL 9022
Optional: Other frame colours available upon request for larger orders
Insert height: 70 mm
Approval
• CE approved
• RINA
[table id=42 /]
Our ‘Dutch Design’ premium quality range of LED Escape signs are designed to clearly identify emergency exits and escape routes, executed in a timeless design that fits in with contemporary architecture. Our range of LED Escape signs allow for easy installation and provide a reliable and stylish solution for use in various types of buildings such as offices, hotels, hospitals and retail. Architects have a specific look in mind when designing buildings, libraries, hotels and offices spaces.
Compliance with requirements and regulations and the safety of your employees/guests are the first priority. Next is that designer look. Our LED Escape Signs provide an energy efficient and classy look with safety in mind. Clients ultimately have safety and cost effectiveness in minds. Our SafeSign LED Escape signs provide a great solution by reducing yearly energy costs and by limiting the impact on our environment.
The SafeSign LED Escape Signs are IP44 protected, CE approved and are available in two formats, recessed and surface mounted, offering ‘fit and forget’ LED technology providing a long lifespan of at least 40.000 hours.
Electrical and photoluminescent in one: the best of both worlds
The main power source comes from electricity, but when the power is lost as a result of a calamity, the photoluminescent capabilities of the sign take over, providing the users with a very clear sign to the exit.
Technical data
Input voltage: AC 90~240V / 50~60HZ
Power: 4W
Lifespan: + 40.000hrs
Viewing distance: > 24M
Class: CE approved
Protection: IP44
Material: Flame retardant ABS plastic
Extra: Exchangeable signs upon request
Frame color: RAL 9022
Optional: Other frame colours available upon request for larger orders
Insert height: 150 mm
[table id=43 /]
The Explosion Proof LED Large Escape Sign is designed to operate in hostile environments. Constructed from corrosion resistant materials, this Escape light sign can be used in indoor and outdoor areas that are subject to water spray or moisture. This Escape Sign fixture was designed to function in areas where flammable gases or vapors and/or combustible dust exist. In these types of environments, a normal fixture could accidentally ignite an explosive reaction. As a result, the DAESUVE GH01 is the ideal Escape Sign in engine rooms of LNG-powered vessels.
Technical data
Article number: LXP200S
Capacity: 25 W
Materials:
• Body: Glassfiber Reinforced Polyester
• Globe: Clear polycarbonate
Protection degree: IP66 /IP67
Dimensions: 745 x 213 x 147 mm
Weight: 6,5 kg
Approval
• Wheelmark
Standard
• EU-type examination certificate by KR Hellas
We are supplier of the specially developed PolyesPro® pipe markings. This product is the highest available quality pipe marking and has a better temperature resistance, therefore a longer service life and improved colourfastness. The tape comes with all the usual 3M™ guarantees. PolyesPro® pipeline markings are made out of two layers; a PVC free polyester base material with the image, finished with a protective laminate. As a result, the material is suitable for insulated pipes, painted pipes and stainless steel pipes.
Benefits of PolyesPro®:
• UV-resistant
• Scratch-resistant
• Usable in extreme weather condition
• Withstand chemicals
• Strong adhesive
• Greater thickness
• Temperature resistance -40 °C up to +130 °C
Offshore platforms and vessels require identification of piping systems according to ISO 14726. We have developed an Basic Line Pipe Marking identification systems according to this regulation for the specific requirements on-board.
Vinyl Laminated Pipe Marking
This pipe marking tape is a standard performance vinyl sandwich manufactured according to 3M™ MCS™ (Matched Component System™) production specifications. This tape comes with a gloss laminated finish and can be used outdoor and indoor in various types of environments.
Offshore platforms and vessels require identification of piping systems according to ISO 14726. We have developed an Economy Line Pipe Marking identification systems according to this regulation for the specific requirements on-board.
Vinyl Unlaminated Pipe Marking
This pipe marking tape is an economic, unlaminated vinyl. The recommended use of this tape is indoors such as a ships engineroom and can be used outdoors with a short lifespan compared to PolyesPro® and the Basic Line.
Single color pipe marking tape is a tape which needs to be combined with the correct color coding. Additionally, a flow direction tape can be added to the combination to enhance identification.